A ring can be worn beneath some fashion gloves, over some gloves, or only when the gloves are off. These are different arrangements, not interchangeable ways to show the same ornament. Getting a ring past the glove's opening does not prove there is room for it inside an individual finger.
Decide which layer you want the ring to occupy before choosing jewelry for the rest of the outfit. This guide concerns ordinary fashion gloves, not protective equipment or an exception to workplace requirements.
Fit the glove without the ring first
Establish how the glove sits on your bare hand: where its finger ends land, where the finger bases meet your hand, and whether you can bend and straighten your fingers normally. A ring should not be used to explain away a glove that already fits poorly.
Dents separates finger length from glove size and offers different fit profiles. Hestra also notes that hand shape and glove style affect fit. Neither a size label nor advice to choose a larger glove establishes room for your ring's specific shape.
For an under-glove ring, check two different spaces
The first space is the entry path. The second is the finger compartment after your hand is inside. Dents' construction guide describes separate finger panels and finger-base pieces; the glove is not one roomy sleeve around the whole hand.
If the ring obviously cannot pass without catching or force, rule out the under-glove arrangement before trying to pull it through. If it enters normally, that answers only the first question. Notice whether the finger now sits short of its usual position, the material presses across the ring, or adjacent fingers cannot move as they did without it. Stop at resistance or discomfort; a hidden ring is not automatically a compatible one.
Imagine one fitted glove with two rings. A familiar narrow band might leave its normal finger position unchanged, while a raised, broad ornament prevents that finger from settling fully. The decision can be to retain the band and leave the ornament off. This is a hypothetical comparison, not a promise that every plain band fits beneath a glove.
An over-glove ring changes the removal order
An outside ring avoids enclosing its decorative top inside the glove, but adds fabric beneath the band. Cornelia James presents rings worn over gloves as a styling choice. That example does not prove that your usual ring size will accommodate even a thin fabric.
Consider this arrangement only if the ring goes on and comes off normally without compressing or dragging the glove. Do not widen an adjustable ring or stretch a glove to force the combination. A thin-looking seam or lining can still occupy the exact place where the band sits.
The order is now glove first, ring second; remove the ring before removing the glove. If that sequence is impractical whenever you need bare hands, choose a gloves-off ring arrangement instead. Do not pull the glove out from beneath the ring.
Exposed fingertips do not necessarily expose the ring
With fingerless gloves, look at the actual end of the material on the finger you intend to use. Short finger sections can still cover the base where a ring normally sits. Bare fingertips therefore do not settle the under-versus-over question.
Compare two hypothetical cuts with the same ring. One leaves the ring's entire wearing position bare; the other ends above it and still covers the band. The first may allow the ring on skin after the glove is on. The second still requires an under- or over-fabric decision. If the glove edge would have to pass over the ornament during removal, take the ring off first.
A purpose-designed access feature is different again. Cornelia James describes a ring window for putting on, removing or displaying a ring without removing the entire glove. Ask the maker whether the feature suits your ring and how it is used; it is not permission to cut a window in an ordinary glove.
Choose a complete gloves-on outfit, not a workaround
If no arrangement works without force or repeated rearranging, keep the ring for bare hands. For the gloves-on outfit, jewelry need not occupy the hand at all. The stud earrings in the black flower brooch and earrings set offer one separate accent. Their dimensions and weight are not supplied in the approved details; ask before judging scale or wearability. The brooch need not be worn.
The ring side-profile guide helps identify projections when an unseen ring needs assessment. Here, your finished decision should specify its layer and removal order. Browse earrings if leaving the gloved hand unadorned is the more usable choice.